Skip to content
Drain Cleaning Chicago(872) 465-4386

Cleanouts: find yours before you need it

A cleanout is a capped fitting on the drain pipe. With one, rodding the main starts in the right place.

The building drain leaves through the basement wall. An indoor cleanout fitting points back up the pipe with a plug in it; some houses also have a capped riser outside, close to the foundation.

Where to look

  • In the basement, at the foot of the big vertical stack, often a round brass or plastic plug in a cast-iron fitting.
  • Low on the front basement wall, where the main drain heads out toward the street.
  • In older houses, a pit in the floor near the front wall holding a fitting with two plugged openings.
  • Outside, a short pipe with a screw cap in the front yard or gangway near the foundation.

Why it changes the visit

With a cleanout the cable goes straight into the main and toward the street. Without one, the plumber may have to go in through a toilet flange or a floor drain trap, which is a longer route with bends and a smaller pipe to pass.

Tell the person on the phone where your cleanout is. If you only find something you think might be one, take a photo to show when they arrive.

If there isn't one

A plumber can add a cleanout to the building drain or outside. It is often suggested after a hard rodding job, because the next one becomes simpler. Work on drain piping inside a Chicago building can often go through the City's Express Permit Program; work more than five feet outside the foundation cannot, so ask which permit an outdoor cleanout needs.

Water still standing in the tub or the floor drain?

Tell the person who answers which drains are slow, what comes up where, and whether it is a house, a two-flat or a condo. Ask how the visit is charged before anyone comes out. Call (872) 465-4386.

(872) 465-4386